Redis Proxy

This extension may be referenced by the qualified name envoy.filters.network.redis_proxy

Note

This extension is not hardened and should only be used in deployments where both the downstream and upstream are trusted.

Redis Proxy configuration overview.

extensions.filters.network.redis_proxy.v3.RedisProxy

[extensions.filters.network.redis_proxy.v3.RedisProxy proto]

{
  "stat_prefix": "...",
  "settings": "{...}",
  "latency_in_micros": "...",
  "prefix_routes": "{...}",
  "downstream_auth_password": "{...}",
  "faults": [],
  "downstream_auth_username": "{...}"
}
stat_prefix

(string, REQUIRED) The prefix to use when emitting statistics.

settings

(extensions.filters.network.redis_proxy.v3.RedisProxy.ConnPoolSettings, REQUIRED) Network settings for the connection pool to the upstream clusters.

latency_in_micros

(bool) Indicates that latency stat should be computed in microseconds. By default it is computed in milliseconds. This does not apply to upstream command stats currently.

prefix_routes

(extensions.filters.network.redis_proxy.v3.RedisProxy.PrefixRoutes) List of unique prefixes used to separate keys from different workloads to different clusters. Envoy will always favor the longest match first in case of overlap. A catch-all cluster can be used to forward commands when there is no match. Time complexity of the lookups are in O(min(longest key prefix, key length)).

Example:

prefix_routes:
  routes:
    - prefix: "ab"
      cluster: "cluster_a"
    - prefix: "abc"
      cluster: "cluster_b"

When using the above routes, the following prefixes would be sent to:

  • get abc:users would retrieve the key ‘abc:users’ from cluster_b.

  • get ab:users would retrieve the key ‘ab:users’ from cluster_a.

  • get z:users would return a NoUpstreamHost error. A catch-all route would have retrieved the key from that cluster instead.

See the configuration section of the architecture overview for recommendations on configuring the backing clusters.

downstream_auth_password

(config.core.v3.DataSource) Authenticate Redis client connections locally by forcing downstream clients to issue a Redis AUTH command with this password before enabling any other command. If an AUTH command’s password matches this password, an “OK” response will be returned to the client. If the AUTH command password does not match this password, then an “ERR invalid password” error will be returned. If any other command is received before AUTH when this password is set, then a “NOAUTH Authentication required.” error response will be sent to the client. If an AUTH command is received when the password is not set, then an “ERR Client sent AUTH, but no password is set” error will be returned.

faults

(extensions.filters.network.redis_proxy.v3.RedisProxy.RedisFault) List of faults to inject. Faults currently come in two flavors: - Delay, which delays a request. - Error, which responds to a request with an error. Errors can also have delays attached.

Example:

faults:
- fault_type: ERROR
  fault_enabled:
    default_value:
      numerator: 10
      denominator: HUNDRED
    runtime_key: "bogus_key"
    commands:
    - GET
  - fault_type: DELAY
    fault_enabled:
      default_value:
        numerator: 10
        denominator: HUNDRED
      runtime_key: "bogus_key"
    delay: 2s

See the fault injection section for more information on how to configure this.

downstream_auth_username

(config.core.v3.DataSource) If a username is provided an ACL style AUTH command will be required with a username and password. Authenticate Redis client connections locally by forcing downstream clients to issue a Redis AUTH command with this username and the downstream_auth_password before enabling any other command. If an AUTH command’s username and password matches this username and the downstream_auth_password , an “OK” response will be returned to the client. If the AUTH command username or password does not match this username or the downstream_auth_password, then an “WRONGPASS invalid username-password pair” error will be returned. If any other command is received before AUTH when this password is set, then a “NOAUTH Authentication required.” error response will be sent to the client. If an AUTH command is received when the password is not set, then an “ERR Client sent AUTH, but no ACL is set” error will be returned.

extensions.filters.network.redis_proxy.v3.RedisProxy.ConnPoolSettings

[extensions.filters.network.redis_proxy.v3.RedisProxy.ConnPoolSettings proto]

Redis connection pool settings.

{
  "op_timeout": "{...}",
  "enable_hashtagging": "...",
  "enable_redirection": "...",
  "max_buffer_size_before_flush": "...",
  "buffer_flush_timeout": "{...}",
  "max_upstream_unknown_connections": "{...}",
  "enable_command_stats": "...",
  "read_policy": "..."
}
op_timeout

(Duration, REQUIRED) Per-operation timeout in milliseconds. The timer starts when the first command of a pipeline is written to the backend connection. Each response received from Redis resets the timer since it signifies that the next command is being processed by the backend. The only exception to this behavior is when a connection to a backend is not yet established. In that case, the connect timeout on the cluster will govern the timeout until the connection is ready.

enable_hashtagging

(bool) Use hash tagging on every redis key to guarantee that keys with the same hash tag will be forwarded to the same upstream. The hash key used for determining the upstream in a consistent hash ring configuration will be computed from the hash tagged key instead of the whole key. The algorithm used to compute the hash tag is identical to the redis-cluster implementation.

Examples:

  • ‘{user1000}.following’ and ‘{user1000}.followers’ will be sent to the same upstream

  • ‘{user1000}.following’ and ‘{user1001}.following’ might be sent to the same upstream

enable_redirection

(bool) Accept moved and ask redirection errors from upstream redis servers, and retry commands to the specified target server. The target server does not need to be known to the cluster manager. If the command cannot be redirected, then the original error is passed downstream unchanged. By default, this support is not enabled.

max_buffer_size_before_flush

(uint32) Maximum size of encoded request buffer before flush is triggered and encoded requests are sent upstream. If this is unset, the buffer flushes whenever it receives data and performs no batching. This feature makes it possible for multiple clients to send requests to Envoy and have them batched- for example if one is running several worker processes, each with its own Redis connection. There is no benefit to using this with a single downstream process. Recommended size (if enabled) is 1024 bytes.

buffer_flush_timeout

(Duration) The encoded request buffer is flushed N milliseconds after the first request has been encoded, unless the buffer size has already exceeded max_buffer_size_before_flush. If max_buffer_size_before_flush is not set, this flush timer is not used. Otherwise, the timer should be set according to the number of clients, overall request rate and desired maximum latency for a single command. For example, if there are many requests being batched together at a high rate, the buffer will likely be filled before the timer fires. Alternatively, if the request rate is lower the buffer will not be filled as often before the timer fires. If max_buffer_size_before_flush is set, but buffer_flush_timeout is not, the latter defaults to 3ms.

max_upstream_unknown_connections

(UInt32Value) max_upstream_unknown_connections controls how many upstream connections to unknown hosts can be created at any given time by any given worker thread (see enable_redirection for more details). If the host is unknown and a connection cannot be created due to enforcing this limit, then redirection will fail and the original redirection error will be passed downstream unchanged. This limit defaults to 100.

enable_command_stats

(bool) Enable per-command statistics per upstream cluster, in addition to the filter level aggregate count. These commands are measured in microseconds.

read_policy

(extensions.filters.network.redis_proxy.v3.RedisProxy.ConnPoolSettings.ReadPolicy) Read policy. The default is to read from the primary.

Enum extensions.filters.network.redis_proxy.v3.RedisProxy.ConnPoolSettings.ReadPolicy

[extensions.filters.network.redis_proxy.v3.RedisProxy.ConnPoolSettings.ReadPolicy proto]

ReadPolicy controls how Envoy routes read commands to Redis nodes. This is currently supported for Redis Cluster. All ReadPolicy settings except MASTER may return stale data because replication is asynchronous and requires some delay. You need to ensure that your application can tolerate stale data.

MASTER

(DEFAULT) ⁣Default mode. Read from the current primary node.

PREFER_MASTER

⁣Read from the primary, but if it is unavailable, read from replica nodes.

REPLICA

⁣Read from replica nodes. If multiple replica nodes are present within a shard, a random node is selected. Healthy nodes have precedent over unhealthy nodes.

PREFER_REPLICA

⁣Read from the replica nodes (similar to REPLICA), but if all replicas are unavailable (not present or unhealthy), read from the primary.

ANY

⁣Read from any node of the cluster. A random node is selected among the primary and replicas, healthy nodes have precedent over unhealthy nodes.

extensions.filters.network.redis_proxy.v3.RedisProxy.PrefixRoutes

[extensions.filters.network.redis_proxy.v3.RedisProxy.PrefixRoutes proto]

{
  "routes": [],
  "case_insensitive": "...",
  "catch_all_route": "{...}"
}
routes

(extensions.filters.network.redis_proxy.v3.RedisProxy.PrefixRoutes.Route) List of prefix routes.

case_insensitive

(bool) Indicates that prefix matching should be case insensitive.

catch_all_route

(extensions.filters.network.redis_proxy.v3.RedisProxy.PrefixRoutes.Route) Optional catch-all route to forward commands that doesn’t match any of the routes. The catch-all route becomes required when no routes are specified.

extensions.filters.network.redis_proxy.v3.RedisProxy.PrefixRoutes.Route

[extensions.filters.network.redis_proxy.v3.RedisProxy.PrefixRoutes.Route proto]

{
  "prefix": "...",
  "remove_prefix": "...",
  "cluster": "...",
  "request_mirror_policy": []
}
prefix

(string) String prefix that must match the beginning of the keys. Envoy will always favor the longest match.

remove_prefix

(bool) Indicates if the prefix needs to be removed from the key when forwarded.

cluster

(string, REQUIRED) Upstream cluster to forward the command to.

request_mirror_policy

(extensions.filters.network.redis_proxy.v3.RedisProxy.PrefixRoutes.Route.RequestMirrorPolicy) Indicates that the route has a request mirroring policy.

extensions.filters.network.redis_proxy.v3.RedisProxy.PrefixRoutes.Route.RequestMirrorPolicy

[extensions.filters.network.redis_proxy.v3.RedisProxy.PrefixRoutes.Route.RequestMirrorPolicy proto]

The router is capable of shadowing traffic from one cluster to another. The current implementation is “fire and forget,” meaning Envoy will not wait for the shadow cluster to respond before returning the response from the primary cluster. All normal statistics are collected for the shadow cluster making this feature useful for testing.

{
  "cluster": "...",
  "runtime_fraction": "{...}",
  "exclude_read_commands": "..."
}
cluster

(string, REQUIRED) Specifies the cluster that requests will be mirrored to. The cluster must exist in the cluster manager configuration.

runtime_fraction

(config.core.v3.RuntimeFractionalPercent) If not specified or the runtime key is not present, all requests to the target cluster will be mirrored.

If specified, Envoy will lookup the runtime key to get the percentage of requests to the mirror.

exclude_read_commands

(bool) Set this to TRUE to only mirror write commands, this is effectively replicating the writes in a “fire and forget” manner.

extensions.filters.network.redis_proxy.v3.RedisProxy.RedisFault

[extensions.filters.network.redis_proxy.v3.RedisProxy.RedisFault proto]

RedisFault defines faults used for fault injection.

{
  "fault_type": "...",
  "fault_enabled": "{...}",
  "delay": "{...}",
  "commands": []
}
fault_type

(extensions.filters.network.redis_proxy.v3.RedisProxy.RedisFault.RedisFaultType) Fault type.

fault_enabled

(config.core.v3.RuntimeFractionalPercent, REQUIRED) Percentage of requests fault applies to.

delay

(Duration) Delay for all faults. If not set, defaults to zero

commands

(string) Commands fault is restricted to, if any. If not set, fault applies to all commands other than auth and ping (due to special handling of those commands in Envoy).

Enum extensions.filters.network.redis_proxy.v3.RedisProxy.RedisFault.RedisFaultType

[extensions.filters.network.redis_proxy.v3.RedisProxy.RedisFault.RedisFaultType proto]

DELAY

(DEFAULT) ⁣Delays requests. This is the base fault; other faults can have delays added.

ERROR

⁣Returns errors on requests.

extensions.filters.network.redis_proxy.v3.RedisProtocolOptions

[extensions.filters.network.redis_proxy.v3.RedisProtocolOptions proto]

RedisProtocolOptions specifies Redis upstream protocol options. This object is used in typed_extension_protocol_options, keyed by the name envoy.filters.network.redis_proxy.

{
  "auth_password": "{...}",
  "auth_username": "{...}"
}
auth_password

(config.core.v3.DataSource) Upstream server password as defined by the requirepass directive <https://redis.io/topics/config>`_ in the server’s configuration file.

auth_username

(config.core.v3.DataSource) Upstream server username as defined by the user directive <https://redis.io/topics/acl>`_ in the server’s configuration file.